Garbage Disposal Repair & Replacement in Sandy & Salt Lake Valley | Mountain Man Plumbing
Source: https://mtnmanplumbing.com/services/garbage-disposal/
Title: Garbage Disposal Repair & Replacement in Sandy & Salt Lake Valley \| Mountain Man Plumbing
Content revision: 553b3663b9573095aa3ec1d97bc1a00afc8d10486c8e771d0ab450f99194c391
Source modified (WordPress record): 2026-09-10T12:27:17+00:00
Extracted at: 2026-09-11T11:56:13+00:00
Freshness: Anonymous canonical WordPress HTML snapshot, cached for at most 120 seconds; browser JavaScript is not executed. Live inventory requires its tool.
## Relevant next steps
This page has no currently verified direct booking-service mapping. Choose an actual service or ask the office; do not infer a service ID from the page title.
- Choose a booking service and check coverage — get_booking_services
- Ask the office about this page — submit_contact; needs: request_id, name, message, user_confirmed
## On this page
- Replace it or try to save it?
- How much disposal do you want?
- Badger 1
- A jammed disposal may not need replacement.
- Show us under the sink
- From the sink.Through the grinder.
- Listen. Look.Find the failed part.
- Does it goin the disposal?
- Disposal service, explained.
- Does a garbage disposal have blades?
- Should I replace a disposal that hums?
- Why does the dishwasher stop draining after a disposal replacement?
- Is a bigger motor always the better choice?
- Can you remove the disposal and install a regular drain?
- Save the unit.Or choose its replacement.
- Keep following the plumbing.
Browser controls omitted; use the source page for interactive features.
Mountain Man Plumbing / The kitchen drain Sandy · Salt Lake Valley
Disposal service hub
# Garbage disposal repair & replacement.
A hum, a leak or a sink full of yesterday’s dinner can stop the kitchen cold. We repair and replace garbage disposals, sort out their drain connections and help you choose a unit that fits the way you cook.
- Shop disposals →
- (385) 766-8935
!Our garbage disposal and drain connection repair beneath a West Valley City kitchen sink
From our repair log / West Valley City The disposal. The drain. The whole connection. ↗
- Disposal service hub
- Hums, leaks & clogs
- Choosing & replacing
- Food & everyday care
- 01 / Shop & book
- 02 / Inside a disposal
- 03 / What goes in?
- 04 / Find the problem
First, what sounds closest?
## Replace it or try to save it?
Three clear choices
## How much disposal do you want?
Every option includes normal removal, installation, connection, testing, and cleanup.
Badger 1 garbage disposal
Budget
### Badger 1
**1/3 HP**
A simple, reliable replacement for lighter everyday use.
Best for rentals, small households, and basic cleanup
Most popular
Badger 5XP garbage disposal
Preferred
### Badger 5XP
**3/4 HP**
More grinding power without paying for premium sound control.
The best fit for most busy kitchens
Pro 750 garbage disposal
Premium quiet
### Pro 750
**3/4 HP**
Premium construction and noticeably quieter operation.
Best near living areas and open kitchens
!Garbage disposal and drain connections under a sink
Worth checking first
## A jammed disposal may not need replacement.
If it hums, jams, or stopped turning, book the repair path. If the motor has failed, your plumber already knows which replacement choices you were considering.
What is it doing? A sentence is plenty. This note and your photo go with the appointment.
Optional photo
## Show us under the sink
One photo helps us arrive prepared. Skip it if you do not have one.
Add photo Selected under-sink photo preview
**Power:** The ⅓ HP choice suits lighter use. The ¾ HP models provide more turning force for everyday grinding.
**Quiet:** The PRO 750 adds sound insulation and multiple grinding stages. Horsepower alone does not tell you how loud a unit will be.
Check the fit under your sink →
Read more: InSinkErator disposal comparison ↗ · InSinkErator PRO 750 specifications ↗
A kitchen workhorse / open it up
## From the sink. Through the grinder.
Turn the assembly, open the housing and follow the working parts. The grind plate throws scraps against a fixed ring; water carries the particles into the drain.
Loading the disposal cutaway…
Under the sink
Drag to turn. Select a part to see what it does and what can go wrong.
Selected part
### The disposal and its drain
Food enters from the sink. The motor turns a grinding plate inside the upper chamber, and water carries the small particles through the side outlet into the P-trap.
#### At a service visit
Choose a named part to see its construction and the symptoms it can cause.
### About the assembly & parts index
Built from the Badger dimensional layout and installation references. The cutaway illustrates a single-stage grinder; the motor winding and water-flow details are teaching geometry. Rotation is slowed so you can follow it. The outer dimensions follow the Badger 5XP reference: 12⅝ inches high and 6⁵⁄₁₆ inches across. The sink, trap and cabinet show the connected installation.
Read more: InSinkErator Badger 5XP specifications ↗ · InSinkErator: how the grind plate and ring work ↗ · InSinkErator: replacement connections ↗
**The disposal and its drain**
Food enters from the sink. The motor turns a grinding plate inside the upper chamber, and water carries the small particles through the side outlet into the P-trap.
**Sink flange & three-point mount**
The stainless flange seals against the sink. A fiber gasket, backing flange and mounting ring clamp underneath; three locking tabs carry the disposal’s weight.
**Rubber splash baffle**
Flexible rubber fingers surround the opening. They help contain splash and reduce the chance of loose material flying upward.
**Grinding plate & swivel lugs**
The motor turns a steel plate. Two blunt lugs swivel on the plate and push scraps outward against the grind ring.
**Stationary grind ring**
Raised edges and openings around the chamber break the scraps down. Small particles and water pass into the discharge space outside the ring.
**Motor, shaft & water seal**
The motor sits below the wet chamber. Its shaft turns the plate through a sealed bearing area that keeps wastewater out of the motor.
**Discharge elbow & gasket**
The side outlet carries ground scraps and water to the drain. A gasket seals the elbow to the housing; the drain tube connects to the trap.
**P-trap & wall drain**
The curved pipe holds a water seal that blocks sewer gas. Water flows over the trap’s outlet and along the horizontal arm into the wall drain.
**Dishwasher inlet & hose**
The dishwasher pumps used water through this smaller upper inlet. A new unit ships with a knockout closing that connection.
**Overload reset & wrench socket**
This Badger-style unit has a manual overload reset underneath and a separate center hex socket for its jam-release wrench.
**Power connection**
A corded unit plugs into a suitable supply; a hardwired unit connects through its protected wiring compartment. The switch controls that supply.
Repair before replacement
## Listen. Look. Find the failed part.
A stuck grind plate, a leaking drain joint and a failed motor each lead to a different repair.
Open the full repair guide →
### It hums but does not turn
The motor has power, but the plate may be jammed. Switch it off promptly. Disconnect power before freeing the mechanism or removing a trapped object with tongs. Keep hands out of the chamber.
The jam and reset sequence →
### Water appears underneath
Start at the first wet connection. A sink seal, dishwasher hose or discharge gasket can often be repaired. Water escaping through a corroded case or internal shaft seal usually points toward replacing the disposal.
Find the source of a leak →
### The motor runs; the sink backs up
The blockage may be in the outlet, trap or shared kitchen drain. A new motor will not clear that pipe. Stop feeding food and check where drainage is restricted.
Follow the drain →
### Nothing happens at the switch
The electrical supply, switch, overload protector or motor may be responsible. A reset that trips again needs the cause found before further use.
Work through a silent unit →
Scrape first / grind the little leftovers
## Does it go in the disposal?
A disposal handles small scraps left after clearing a plate. Large loads, grease and stringy waste make more work for the grinder and the drain.
Find a food or item
✓
Small amounts
### Small, soft food scraps
Soft bits left after scraping the plate can be fed gradually with cold running water. Remove bones and packaging first.
↗
Keep out
### Grease, oil & fat
Cool grease in a container and put it in the trash. It coats and builds up inside drain pipes.
↗
Trash or compost
### Potato peels & fibrous scraps
Peel piles and stringy scraps can pack the outlet or collect in the drain. Scrape them into the trash or an accepted compost stream.
↗
Scrape it out
### Rice, pasta & dough
Sticky, starchy masses can collect in the trap and branch drain. An entire pan of leftovers belongs in the trash or accepted compost.
↗
Trash or compost
### Coffee grounds & eggshells
Grounds and shell fragments add settling solids to the drain. Eggshells do not sharpen the grinding parts.
↗
Keep out
### Bones, pits & hard shells
Large bones, fruit pits and hard shells can jam or damage the mechanism. Put them in the trash.
×
Never grind
### Utensils, glass & packaging
Hard objects can be thrown or damage the unit. Switch off and disconnect power before retrieval; use tongs for visible loose objects.
×
Keep out
### Drain cleaner & chemicals
Avoid caustic drain openers and household chemicals in the disposal. Use a disposal cleaner permitted by the unit’s manufacturer.
Scrape bulk food into the trash or an accepted compost collection. The care guide explains everyday use, cleaning and the extra solids a disposal sends to a sewer or septic tank.
Food, cleaning and septic guidance →
Good questions
## Disposal service, explained.
### Does a garbage disposal have blades?
It uses a rotating plate with blunt swivel lugs. The lugs push scraps against a stationary grind ring around the chamber. Water carries the small particles through the ring and into the drain.
Link to this answer
### Should I replace a disposal that hums?
A hum can mean the motor is powered but the plate is jammed. Switch it off promptly. A removable obstruction can make repair worthwhile; a seized or damaged motor may call for replacement.
Link to this answer
### Why does the dishwasher stop draining after a disposal replacement?
The new disposal’s dishwasher inlet may still have its knockout plug. A kinked or obstructed hose can cause the same symptom. The installer checks the inlet, hose routing and a dishwasher drain cycle.
Link to this answer
### Is a bigger motor always the better choice?
Motor power is one factor. Sound insulation, grind design, cabinet clearance, drain height and your cooking habits also matter. A quieter ¾ HP model can be a more useful upgrade than extra horsepower alone.
Link to this answer
### Can you remove the disposal and install a regular drain?
Yes. We can fit a sink strainer and reconnect the drain, including a suitable dishwasher drain connection when needed. That is a useful option for a household that scrapes its food waste into the trash or compost.
Link to this answer
Let’s get the kitchen moving again
## Save the unit. Or choose its replacement.
Shop disposals →
- Dishwasher connections →
- Sink & faucet plumbing →
- Under-sink shutoffs →
### Sources & public guide record
Guide data (JSON) · Read this page as plain text
- InSinkErator: how the grind plate and ring work ↗
- InSinkErator Badger 5 drawing and specifications ↗
- InSinkErator Badger 5XP specifications ↗
- InSinkErator disposal comparison ↗
- InSinkErator PRO 750 specifications ↗
- InSinkErator: freeing a jam ↗
- InSinkErator: finding a disposal leak ↗
- InSinkErator: disposal and drain blockages ↗
- InSinkErator: cleaning the baffle and chamber ↗
- InSinkErator: replacement connections ↗
- InSinkErator: everyday food waste ↗
- Salt Lake City: fats, oils, grease and food waste ↗
- EPA: caring for a septic system ↗
- Whirlpool: operating a batch-feed disposal ↗
Connected in your home
## Keep following the plumbing.
- 01 **Drain cleaning →** Follow a backup beyond the grinder into the kitchen drain.
- 02 **Appliance & laundry plumbing →** See how the dishwasher hose connects beneath the sink.
- 03 **Sink installation & plumbing connections →** Check cabinet space, sink depth and drain connections together.
## Approved image details
- https://mtnmanplumbing.com/wp-content/uploads/2026/05/west-valley-city-garbage-disposal-drain-connection-repair.webp — Garbage disposal installation under kitchen sink in West Valley City Utah
Source page: https://mtnmanplumbing.com/past-work-west-valley-city-garbage-disposal-repair/
---
Content index · JSON and conversion details